 |
M-Point Latching (ON/OFF) Control Module |
 |
 |
|
 |
 |
|
The latching control module is designed to control RV
accessories like lights and water pumps. It provides a centralized power
handling point that can be controlled from multiple locations. It is a latching
contact, moderate current handling module. Installing this M-Point module in a
circuit allows you to add as many control points (switches) as you need. The
control points (switches) may be placed anywhere in the RV as they are low
current signal carrying lines.
|
Dimensions:
2.1"h x 3.75"w x 1.25"d
Max Load:
15Amps max
Module Draw:
160ma @ 12 volts (latched)
0ma @ 12 volts (unlatched)
Wiring Diagram:
View or Download (23.4KB .PDF file)
Updated: 2/25/2007 2:50:03 PM
$39.95 each
|
|
Here's one possible usage scenario:
Like most RV'ers, you've probably found that your water pump is OFF and out of reach at the most inconvenient times:
- You've used your bathroom during a rest stop and found that you forgot to turn your water pump ON when it came time to flush the commode.
- You've decided to wash your hands using the external utility shower after dumping your holding tanks and found that the water pump is OFF.
- You've come back from the beach covered with sand and tried to rinse off outside your RV using the external utility shower only to find that the water pump is OFF.
The M-Point latching control module allows you to install a water pump switch in the bathroom, in the utility shower compartment, anywhere you need to operate the RV water pump. You can turn the water pump ON from any location and turn it OFF from any location.
With M-Point control modules you can add as many control points (switches) as needed without complicated wiring schemes.
If you have any questions about the suitability of this control module to your particular application, call us, we'd be glad to talk to you about it.
|
