|
The Maxis control panel consists of a back-lit Liquid Crystal
Display (LCD,) two soft keys, a navigational keypad, a beeper, and an On/Off
switch. The LCD displays the selected device, a padlock icon, a menu item
indicator and two soft key labels.
To select a different device, press the
vertical scroll buttons (PREV or NEXT) or press the lower two key fob
transmitter buttons. (device selection available only with the 4 button
key fob transmitter.)
Once a device is selected, you
can operate the device locally from the control panel by pressing either of the
soft keys located directly under the LCD or you can
operate the device remotely from the hand-held key fob remote control by pressing
either of the key fob's upper two buttons. (Device control available with both
the 2 and 4 button key fob transmitters.)
The menu is captioned with a "N/N" in the lower left hand
corner. For example, 1/7 indicates that the menu item currently displayed is number 1 of 7
at the current menu level. This
is provided to give you a sense of where you are in the menu system and how
many menu items are available at the current menu level.
A padlock icon is displayed in the upper right hand corner
of the LCD. During normal operation the padlock will appear open. When the Maxis is in demo mode, the padlock will be closed. Demo
mode allows the Maxis to respond to control panel inputs and to key fob inputs
but will not actually operate any of the connected devices. This mode is
typically used when an RV is being displayed at an RV show or when you wish to
prevent children from operating any of the connected devices. The Maxis should
be password protected to insure that demo mode cannot be turned off by
unauthorized persons.
Westhaver Associates, Inc. can customize the Maxis firmware
to match the device descriptions to the devices installed in the target RV.
The Maxis may be further tailored to the needs of a particular OEM in the
areas of hardware capability, firmware behavior and OEM branding. Shown below
is one possible Maxis configuration. The devices listed may be different or
appear in a different order depending upon your particular needs.
 |
The Maxis Configuration Menu |
 |
 |
|
 |
 |
|
To enter the Maxis configuration menu, press the horizontal <PREV> and <NEXT> buttons
simultaneously. If the configuration is password protected, you will be prompted
to enter the password, otherwise the Maxis Configuration Menu will display.
|
